#433b, "Miner Mike" in HO/HOn3 scale: This white-metal figure is supplied by Alexander Scale Models, and is the perfect addition to the Calico Mine Car and the Idaho Springs Mine. It is a single white metal figure ready to be cleaned up and painted. Configure "Miner Mike" as pushing his mine car down the narrow-gauge mine track to be dumped.

#912, Door (2 panel over 2 panel) 3 per bag HO scale: This is a standard two over two (exterior or interior) door, 3 per bag in HO scale.

Details: Measuring Your Model's Windows and Doors
"A" = 0.445" (11.303 mm)
"B" = 0.922" (23.4188 mm)

Note: Our small parts, such as these detailed windows, are made from ABS thermoplastic and injection molded at our manufacturing facility in Oregon.

#913, Door (1 glazed over 2 panel) 3 per bag HO scale: This is a standard three panel (top glazed), exterior or interior door, 3 per bag in HO scale.

Details: Measuring Your Model's Windows and Doors
"A" = 0.465" (11.811 mm)
"B" = 0.985" (25.019 mm)

Note: Our small parts, such as these detailed windows, are made from ABS thermoplastic and injection molded at our manufacturing facility in Oregon.

#914, Door (1 glaze over 1 panel, double) 2 per bag HO scale: This is a double door set with one fixed door. Each comes with two vertical panels (the large top panel is glazed). These doors can be used as an exterior or interior door. 2 doors per bag in HO scale.

Details: Measuring Your Model's Windows and Doors
"A" = 0.719" (18.2626 mm)
"B" = 1.010" (25.654 mm)

Note: Our small parts, such as these detailed windows, are made from ABS thermoplastic and injection molded at our manufacturing facility in Oregon.

#915, Door (2 glaze over 2 panel) 3 per bag HO scale: This is a single two-over-two door set with the large upper panels glazed. This door can be used as an exterior or interior door. 3 doors per bag in HO scale.

Details: Measuring Your Model's Windows and Doors
"A" = 0.444" (11.2776 mm)
"B" = 0.957" (24.3078 mm)

Note: Our small parts, such as these detailed windows, are made from ABS thermoplastic and injection molded at our manufacturing facility in Oregon.

#916, Door (5 panel) 3 bag HO scale: This is a single five vertical-panel door and is normally used as an interior door. 3 doors per bag in HO scale.

Details: Measuring Your Model's Windows and Doors
"A" = 0.469" (11.9126 mm)
"B" = 1.026" (26.0604 mm)

Note: Our small parts, such as these detailed windows, are made from ABS thermoplastic and injection molded at our manufacturing facility in Oregon.

#917, Door (transom over 2 glaze over 2 panel) 2 per bag HO scale: This is a single two-over-two door (the top panels are glazed). This set also comes with a glazed transom above the door. This is normally used as an interior door. 2 doors per bag in HO scale.

Details: Measuring Your Model's Windows and Doors
"A" = 0.462" (11.7348 mm)
"B" = 1.11" (28.194 mm)

Note: Our small parts, such as these detailed windows, are made from ABS thermoplastic and injection molded at our manufacturing facility in Oregon.

#918, Doors (2 transom over 5 panel) 2 per bag HO scale: This is a single five vertical panel door with a twin glazed transom. This is normally used as an interior door. 2 doors per bag in HO scale.

Details: Measuring Your Model's Windows and Doors
"A" = 0.477" (12.1158 mm)
"B" = 1.285" (32.639 mm)

Note: Our small parts, such as these detailed windows, are made from ABS thermoplastic and injection molded at our manufacturing facility in Oregon.

#919, Saloon Doors 2 per bag HO scale: This is a pair of swinging "saloon-type" doors. These can be used as either interior or exterior doors. 2 door sets per bag in HO scale.

Details: Measuring Your Model's Windows and Doors
"A" = 0.560" (14.224 mm)
"B" = 1.0" (25.4 mm)

Note: Our small parts, such as these detailed windows, are made from ABS thermoplastic and injection molded at our manufacturing facility in Oregon.

#941, Victorian Door and Vent 2 per bag HO scale: This is a Victorian decorative oval window with vent ready for paint. There are 2 windows per bag in HO scale.

Note: Most of our small parts, such as these detailed Victorian windows, are made from thermoplastic and injection molded at our manufacturing facility in Oregon.