***THIS ITEM HAS BEEN ORDERED FROM OUR SUPPLIER AND WE HAVE BEEN TOLD DUE TO COVID-19, DELIVERY MIGHT BE IN LATE DEC 2020.***

#0013a, Extra Stainless Steel Tips to our Glue Applicator Bottle: It's always a good idea to have extra tips to your glue bottle. These tips fit our Glue Bottle (#0013). There are 5 tips in each bag.

***THIS ITEM HAS BEEN ORDERED FROM OUR SUPPLIER AND WE HAVE BEEN TOLD DUE TO COVID-19, DELIVERY MIGHT BE IN LATE DEC 2020.***

#0013, 50mL Milky White Glue Applicator Bottle: Now you can put a pin-point of glue EXACTLY where you want it. The large bottles of glue you normally find at your local variety or hardware store are too big for gluing small parts. This small 50mL bottle is perfect for those small jobs when building your Campbell kit. This bottle is milky-clear and comes with its own applicator needle tip. Bottle dimensions: about 3 inches tall and 1-3/8 inch in diameter. Note: the bottle printing says 50cc, which is also 50mL.

Click here for extra Glue Bottle Tips.

#0012, Hobby Knife: For those new to building scale models or for the modeler that just needs another hobby knife, this is for you. This knife is 5-1/2" long (tip to handle end) and the aluminum hand-piece diameter is 5/16". A blade sheath and 5 extra #11 blades are supplied.

CAUTION! The blades on this knife are EXTREMELY SHARP. Use with CAUTION.

#0015, 6 inch Pocket Rule: To successfully build any craftsman Kit you'll need an accurate ruler. This 6 inch pocket rule is made of stainless steel and has the common dimensional divisions we use in building our kits. Graduations include 1/32 and 1/64 of an inch increments. This is an essential tool when identifying kit parts. This rule comes with its own pocket clip which can also be used as a depth gauge. The reverse side has a decimal equivalent chart.

#0014, 12 inch Rule: To successfully build any craftsman Kit you'll need an accurate rule. Unlike our 6-inch rule which is great for carrying in your pocket, this 12-inch rule will be your go-to ruler during the assembly of your Campbell kit. We use this 12-inch rule exclusively during the wood-cutting and packing processes at our manufacturing facility in Oregon. It is made of stainless steel and has the common dimensional divisions of 1/8", 1/16", 1/32" and 1/64". This is will be one of your most-used tools on your assembly table.

#0019, Starter Set for Cutting & Trimming:

To properly cut and trim walls, floor, trim and other scale model details, you need the proper tools. This Starter Set for cutting and trimming will get you started in the right direction. This set includes:
- 5-7/8" x 8-1/2" Self Healing Cutting Mat,
- an 8 inch Stainless Steel Ruler (Front side: Inch Scale, backside: Metric Scale)
- Two Utility Knife Handles (X-acto type)
- Sixty #11 Classic Fine-point Blades
- Twelve #16 Scoring Blades
- Twelve #17 Chisel Blades

This is a "MUST HAVE" cutting set for any serious modeler.

CAUTION: I cannot stress enough...these blades are VERY SHARP.

#0016, 4 inch Digital Caliper: Sometimes kit parts can be similar in size and a ruler just won't do. To get an accurate measurement you need a caliper. This 4 inch digital caliper is made of stainless steel and can give you accurate outside, inside and depth measurements. The digital read-out is easy to read and by the push of a button changes your measurement from inches to millimeters. Two button batteries are included. Get them while they are available at this low price.

#0021, Tweezers, set of 3. This set of stainless steel fiber grip tweezers includes two locking and one straight hand-piece. The straight hand-piece is 6-11/16" long, the straight locking hand-piece is 6-3/8" long and the bent-tip hand-piece is 6-5/16" long. Holding a small part securely while you paint and/or glue it is a must and this set of tweezers will do the job. Add a set of tweezers to your kit building supplies today.

#0017, 10 piece Anti-static Stainless Steel Tweezers Set: Sometimes you need a nice pair of tweezers to hold a tiny part or reach into an area of your kit...how about a set of ten? As you can see, some tweezers have a blunt point, some round and most have a needle sharp point, while two have a bent neck. These tweezers are also excellent for electronics, jewelry and other fine crafts, medical and laboratory work. This kit comes with a portable black nylon storage bag with Velcro closure and a carrying strap. Sizes are ESD-10, 11, 12, 13, 14, 15, 16, 17, 18, and ESD34A-sa (blunt). Keep a set near your assembly table.