#392, Norm's Landing Pier Kit HO scale: This kit is a wonderful representation of a common pier seen around the country for the past 100+ years. Its size offers a place for Norm's Landing Boat Shop, plus Norm's Landing Ice House and Cafe. All named after Norman Collins, the husband of Sherry Collins who was one of the original Campbell Scale Models employees and designer of many Campbell kits. This pier has a ramp leading down to a series of boat slips where row boats can be rented. This craftsman kit consists of scale lumber (sugar pine). It is ready for paint and weatherizing. Complete instructions, drawings, and templates are included. This is a laser-cut kit.

Dimensions:Ramp (from shore to pier) is 9-15/16 by 1 in., the Truck Ramp is 5-7/16 by 1-7/16 in., the fishing pier is 7-1/2 by 9-5/16 in., and the float is 7-1/8 by 5 in.

#394, Hamilton's Dinghies Kit HO scale: This craftsman kit consists of scale lumber (sugar pine) and is ready for paint and weatherizing. Complete instructions, drawings, and templates are included. This is a laser-cut kit.

Dimensions: 3-3/4 x 8-3/4" (9.5 x 22.1 cm)

#396, Norm's Landing Boat Shop HO scale: This is where small boats could be built and serviced. Provisions for lifting the boats out of the water are provided. This craftsman kit consists of scale lumber (sugar pine) and is ready for paint and weatherizing. Complete instructions, drawings, and templates are included. This is a laser-cut kit.

Dimensions: 3-1/2" x 6-1/4" (8.9 x 15.9 cm)

#397, Norm's Landing Ice House & Cafe HO scale: This allowed the fishermen to ice down their fish to keep them fresh until they got home. When fishing was slow you could sit in the caf� to have a cup of coffee and watch the boats go by. This craftsman kit consists of scale lumber (sugar pine) and is ready for paint and weatherizing. Complete instructions, drawings, and templates are included. This is a laser-cut kit.

Dimensions: 22-3/8" x 5-1/4" (56.8 x 13.3 cm)

#455, Cordage Company in HO scale: The Cordage Co. was designed to go near a waterfront for the manufacture of rope for use in ship�s rigging. However, because of its design it could be used as many different types of industry and because of it's "over the track" design it requires only a small amount of actual ground space. This craftsman kit consists of scale lumber (sugar pine) is ready for paint and weatherizing. Complete instructions, drawings, and templates are included.

Dimensions: 5-3/8 x 6-3/8" (13.6 x 16.1cm)

#944, Bundle of Campbell Stripwood:
We've had a number of requests for our stripwood which isn't the standard balsa you might find at your local hobby shop, but the actual tight-grained sugar pine we cut for our kits. Sizes, lengths and profiles vary. This material, in the past, was considered normal waste from our milling and laser processes, but now it's finding its way to modelers who like to kit-bash or build from scratch. Material thicknesses vary, but you'll find a lot of common thicknesses of 1/32", 1/16", 3/64", etc. in each bag. Also you might find pieces with profiles such a gang-planking, lap-cuts, board-on-board or even batten-on-board.

Each bundle (bag) is packed approximately 2" by 5" by 12", and weigh varies from 10 to 12 ounces.