#0230, Bunkhouse A Kit in HO scale: The Campbell Scale Models Bunkhouse A Kit in HO scale is designed to introduce those new to scale modeling with fewer parts and complexity. Wood parts are pre-cut to size with die-cast plastic windows. Template drawings and complete step-by-step instructions are included. The wood walls, floor card and roof cards are all laser-cut. See the pictorial-of-parts page below for details.

Kit Documents
• See our note about missing kit documents on our Kit Parts/Docs page.
• Pictorial of kit #230, Bag A parts

#0231, Bunkhouse B Kit in HO scale: This kit is designed to introduce those new to scale modeling with fewer parts and complexity. Ideal for a forest log cutting site. Wood parts are pre-cut to size with die-cast plastic windows. Template drawings and complete step-by-step instructions are included. This is a laser-cut kit.

Kit Documents
• See our note about kit documents on our Kit Parts/Docs page.

#249, Wood Barrels Red in HO scale: These barrels are made from precision-turned hardwood and are dyed red, with raised trim and barrel bands. These are the same barrels found in our HO bridge and trestle kits. 12 per bag in HO scale.

Note: Each HO barrel is approximately .466 (15/32) inch tall by .316 (21/64) inch at its widest diameter. These barrels are cut on a lathe so slight size variations are expected.

#301, Ballasted Deck Pile Trestle Kit in HO scale: This is Campbell Scale Models' 50 foot Ballasted Deck Open Deck Pile Trestle kit in HO-scale. It includes three bents, two bulkhead planks and a open deck for track ballasting. This trestle is perfect for traversing short dry creek beds and low areas. It features all-wood construction with many parts pre-cut to size. Bent and deck template drawings are included with the instructions.

Dimensions: 6-7/8 x 3'' (17.3 x 7.6cm)

Note: Does not include rail ties.

Kit Documents
• See our note about kit documents on our Kit Parts/Docs page.

#302, Open Deck Trestle Kit in HO scale: This is Campbell Scale Models' 50 foot Open Deck Trestle kit in HO-scale. Great for fording that small streams. It features all-wood construction with many parts pre-cut to size. Template drawings and instructions are included.

Dimensions: 6-7/8 x 3" (17.3 x 7.6cm)

Kit Documents
• See our note about kit documents on our Kit Parts/Docs page.

#303, Curved Trestle Kit in HO scale: This is Campbell Scale Models' 70 foot Curved Trestle kit in HO-scale. It features all-wood construction with many parts pre-cut to size. Each kit comes with full-sized templates showing you how to build this curved trestle to the following radii: Straight, 36, 34, 32, 30, 28, 26, 24, 22, 20 and 18 inches. See our pdf file that shows these radii. Detailed instructions are included.

Dimensions: 9-21/32 x 1-3/8" (24.5 x 3.5cm)

Kit Documents
• See our note about kit documents on our Kit Parts/Docs page.

#304, Tall Curved Trestle Kit in HO scale: This is Campbell Scale Models' 40+ foot Tall Curved Trestle kit in HO-scale. For passing over larger chasms or over a track passing underneath. It features all-wood construction with many parts pre-cut to size. Each kit comes with full-sized templates showing you how to build this curved trestle to the following radii: straight, 36, 34, 32, 30, 28, 26, 24, 22, 20 and 18 inches. See our pdf file that shows these radii. Detailed instructions are included.

Dimensions: 15-1/4 x 1-3/8'' (38.7 x 3.5cm)

Kit Documents
• See our note about kit documents on our Kit Parts/Docs page.

#305, Howe Truss Bridge Kit in HO scale: Perfect for passing over a chasm too deep for pilings...it looks great too! The Howe Truss was originally designed to combine diagonal timber compression and vertical iron rod tension members and was patented in 1840. Its impressive strength over long spans contributed to its overwhelming popularity as a railroad bridge. This bridge features all-wood construction with many parts pre-cut to size. The tensions rods used in this kit are made of steel piano wire. Drawings, instructions, and templates are included.

Customer Images: Howe Truss Bridge 1.

Kit Documents
• See our note about kit documents on our Kit Parts/Docs page.

#306, Covered Bridge Kit in HO scale: You can still find a few covered railroad bridges east of the Mississippi most in the northeast (New Hampshire). Today, the only standing covered RR bridge west of the Mississippi is found in Cottage Grove Oregon. These bridges make a great addition to any layout depicting the late 1800s to early 1900s. Add one to your layout. This bridge features all-wood construction with many parts pre-cut to size. Template drawings and instructions are included. This is a laser-cut kit.

Dimensions: 14-21/32 x 3-1/4'' (37.2 x 8.2cm)

#307, Wharf Kit in HO scale: This is a great kit for loading barges or ships in a marine setting. Our Wharf Kit is all-wood construction with many parts pre-cut to size. Included with this kit are the gangway, floating pier, template drawings and instructions. This wharf and its components are highly configurable and make a great addition to any layout which included a marine environment. This is a laser-cut kit.

Dimensions: 22-3/8 x 5-1/4'' (56.6 x 13.3cm)